Frankfurt, Germany–February 6, 2008- Following a well-received sneak preview at the Winter NAMM show in January, Aviom, exclusive developer of the world‘s fastest audio transport protocol, A-Net® is introducing the latest addition to its innovative Pro64 Series of audio distribution products, the 6416m Mic Input Module, at the MusikMesse show (Hall 8.0 Stand H46). In tandem with this debut are its companion products, the RCI Remote Control Interface and the MCS Mic Control Surface.

The industry has been eagerly anticipating Aviom‘s new Pro64 series products with a remote-controllable 6416m Mic Input Module, and the product delivers with 16 state-of-the-art mic-level analog inputs to a Pro64® audio network system. Each channel on the 6416m has a continuously variable gain setting, multi-segment signal level LEDs, and individual channel on/off switches. The 6416m supports all valid Pro64 sample rates, from 44.1/48kHz± to 192kHz± Because the system does not rely on sample rate converters users are guaranteed pristine, low latency distribution of the digital signal regardless of the sample rate of incoming audio.

According to Ray Legnini, Aviom‘s product research and development manager, “Our design team has put in countless hours to make the 6416m the best sounding remote-controlled mic preamp currently available anywhere. When you consider the power and versatility that the Pro64 network adds to the mix, this product is an extraordinary value. The MCS is designed to make remote control of the networked mic pres simple and intuitive. This suite of products delivers outstanding fidelity, coupled with the flexibility and ease of use Aviom is known for.”

The 6416m can be remote controlled by adding the RCI Remote Control Interface and MCS Mic Control Surface. The 1U RCI provides a network access point and monitor station and accepts the MCS Mic Control Surface, which is used to select and edit any active mic preamp channel anywhere in the network. The Control Group function on the 6416m and RCI allows control of active mic channels to be divided among up to four different simultaneous users and control points.

The 3U-high 6416m Mic Input Module is compatible with all Aviom Pro64 digital audio network products and can be connected to analog or digital output modules, or to the 6416Y2 Yamaha® console card in any combination. Aviom‘s Virtual Data Cable™ (VDC) connectivity for GPIO, MIDI, and RS-232, also included on the rear panel of the 6416m Mic input Module, allow users to configure and transmit up to 14 channels of non-audio data throughout the A-Net Pro64 network without compromising audio bandwidth.

Other features include +48V phantom power, low-cut filter, phase invert, and pad per channel. Each 6416m can save 16 mic preamp presets that store all input channel parameters for easy ecall. Mic inputs use balanced XLR connectors; the passive split/auxiliary input connects via DB25 multipins. A-Net audio network connections feature locking EtherCon RJ45 connectors.

(more)

For more information about the 6416m, RCI, MCS, or any of Aviom‘s products, visit www.aviom.com.

Aviom is the world leader and pioneer of personal monitor mixing technology with the popular Pro16 Series, as well as the exclusive developer of the revolutionary Pro64 Series of audio networking products. All Aviom products are powered by A-Net® the company‘s groundbreaking high-speed digital audio transmission protocol. Aviom products solve problems in a variety of different environments, including live sound reinforcement, audio recording studios, houses of worship, theater, broadcasting and post-production facilities and a host of commercial installations. Aviom‘s entire line of high-quality professional audio products are designed and manufactured in the USA.

more…

Powerful Yamaha Recording in a Portable Package

Yamaha Corporation of America introduces the Pocketrak 2G, a light and compact pocket recorder featuring 2GB of built-in memory, long battery life, easy USB file transfer, and Steinberg Cubase AI DAW software.

The Pocketrak 2G builds upon a successful lineage of recording technology from Yamaha and features 2 tracks of CD quality recording in PCM, MP3 and Windows Media (WMA) formats. It‘s perfect for podcasting, field and location recording, audio for video and more.

“The goal of any pocket recorder is to be ready to capture audio wherever and whenever it happens,” said Athan Billias, Director of Marketing - Technology Products for Yamaha. “The Pocketrak 2G‘s small size, long battery life, and large built-in memory provide Yamaha quality recording anywhere, anytime, and comes with Cubase AI for a complete music production solution.”

The Pocketrak 2G includes a rechargeable AAA nickel-hydrogen battery capable of providing 19 hours of MP3 recording to it‘s 2GB of internal memory. Plugging its sliding USB connector into a powered USB bus simultaneously recharges the battery and transfers files to a PC or Mac.

The Pocketrak 2G is the only portable recorder to house an on-board speaker in addition to a headphone jack, making it a handy portable music player that supports MP3 and WMA files with DRM10 support.

Included in the box is the Pocketrak 2G, a USB extension cable, stereo earphones, a leather carrying case and stand adapter, as well as Cubase AI, an “Advanced Integration” version of Steinberg‘s legendary digital audio workstation software specially built to seamlessly integrate with Yamaha hardware.

The Pocketrak 2G will be available in April, 2008 and will retail for $399.

For more information, visit www.yamaha.com.

Chatsworth, CA, February 4, 2008–Globalstor Data Corporation, premier OEM Integrator of high performance RAID, SAN and storage/video servers, is pleased to introduce its new ExtremeStor-DI Tower workstation, a compact version of Globalstor‘s signature ExtremeStor-DI server line.

Optimum for uncompressed HD/2K capture and playback, the ExtremeStor-DI tower is a scaled down, cost-effective digital intermediate workstation that mirrors the functionality and architecture of its big brother. The sleek dual Quad Core tower-based workstation is built for easy installation and equipped with 10 Fault tolerant hot swappable SATA drives that can support a wide range of RAID levels including RAID 5.

“As a data storage solutions developer and provider, Globalstor Data Corporation recognizes that there are various degrees of needs and services among today‘s post production industry,” says Globalstor Data Corporation President Scott Leif. “The ExtremeStor-DI Tower is the ideal system for post production facilities that are in need of high-quality HD 2K capture, playback and color correction applications but do not require the abundance of drives offered within our ExtremeStor-DI server line. Like the ExtremeStor-DI server, the ExtremeStor-DI Tower shares in its robust design, but presents it in a smaller, lightweight, portable system that allows it to be marketed at an affordable price point.”

While the ExtremeStor-DI Tower offers a cost-effective alternative option, Leif says the new product proves efficient in many other ways. “The ExtremeStor-DI Tower comes with a cost of .001 tenths of a cent per megabyte, making it one of the lowest cost per Gigabyte solutions available in today‘s industry,” says Leif. “Its versatility and portability enables digital intermediate facilities to enhance their quality of service and productivity in a time effective manner, which is achieved by providing HD ready storage at on-site film locations that can go directly back to the edit bay within the same day. This allows editors improved management and content processing, making digital dailies a breeze.”

With capacities ranging from 2.5TB to 10TB, the ExtremeStor-DI Tower integrates Dual Intel® Xeon® or AMD Opteron™ Quad Core processors for maximized computing power that can deliver up to 600Mb/sec of sustained data throughput in RAID 5. It is compatible with Windows XP™ or Windows 2003 open platform operating systems on a RAID protected boot disk drive. In combining the ExtremeStor-DI Tower hot-swappable disk drives, you achieve a well-equipped solution for safeguarding against downtime and critical data loss.

Globalstor Data Corporation is a leading distributor of high performance RAID, SAN and storage/video servers. Widely recognized for its value-added services, including systems integration and customer support, Globalstor is an OEM with a full spectrum of hardware and software support offering a broad spectrum of broadcast and video professional solutions including DVD-R Digital Video Dailies solutions, 2K and 4K Digital Intermediate solutions, and high-performance hi-definition video servers offering scaleable storage up to 36TB‘s in a single server. Globalstor serves a worldwide customer base from its U.S. headquarters in Chatsworth, California and internationally through a strong foundation of over-seas authorized resellers. For more information regarding Globalstor Data Corporation, visit www.globalstor.com.

SANTA CLARA, CA, February 5th, 2008 - On Jim Lauderdale‘s 2008 Grammy-nominated album, “The Blue Grass Diaries,” producer, engineer and recording artist Randy Kohrs cut through the mix with Lauten Audio‘s Horizon tube microphone. The Horizon was used exclusively on fiddles, all of the second guitar overdubs, and female harmonies.

“On the female harmonies, the Horizon helped the soft voices cut through the hard hitting vocals of Jim and me without having to eq all the body out of them,” said Randy Kohrs. “For me, that‘s a lot of finite eq work I never have to do with the Horizon tube microphone. On the fiddle, it helped the lower sweet, woody tones speak through a barrage of mid-range instruments, like the banjo and resonator guitar, and brought out the clarity. Aaron Till said he had never heard his fiddle so well recorded. The Horizon is a complete studio work-horse built to stand the grueling test of time. I could not ask for more in a microphone.”

Jim Lauderdale is a multi-talented performer and songwriter in both country and bluegrass music, and with the highly successful release of “The Bluegrass Diaries,” he continues to make his mark in both genres. His career has taken him all over the world, enriching his ever-growing fan base, and his music has been recorded by artists ranging from George Strait to George Jones. Contributing their talents to “The Blue Grass Diaries” are Jesse Cobb on mandolin, Richard Bailey on banjo, Jay Weaver on bass, Cody Kilby on guitar, Randy Kohrs on resonator guitar and harmony vocals, Aaron Till on fiddle, Ashley Brown and Cia Cherryholmes on vocal harmonies, among other special guests.

“When I heard about the Grammy nomination, I was extremely happy for Jim and Randy,” said Brian Loudenslager, founder of Lauten Audio. “The diverse usage of the Horizon on the album further solidifies what we have said all along about this microphone‘s incredible versatility.”

The Horizon tube microphone is Lauten Audio‘s first commercially available product, with three new studio models to follow this year. Designed as a work-horse, the Horizon is solidly built and features an NOS military grade tube, custom wound output transformer and high-resolution electronics. The mic is available in dealers throughout the United States and Canada, as well as other parts of the world.

About Lauten Audio:

Lauten Audio is a high-end microphone manufacturer formed by professionals with diverse backgrounds ranging from microphone design, physics, recording engineering, electrical engineering, international business, and manufacturing. The company‘s philosophy is to build better sounding microphones through unique designs, careful component selection, efficient manufacturing processes, and extensive listening tests.

Lauten Audio is located in Santa Clara, CA. For more information on Lauten Audio‘s products and organization please visit www.lautenaudio.com

Hollywood, Fla. - (January 31, 2008) - Cerwin-Vega!, a leading manufacturer of loudspeakers and audio products, proudly announces the introduction of the newest edition to the Cerwin-Vega! Active Series: the CVA-115 Active Subwoofer. Much like its predecessors, the CVA-121 and CVA-118, the new CVA-115 features Cerwin-Vega‘s legendary driver design and bass performance, incorporated in a small compact footprint. A built-in amplifier provides a completely integrated active system and a functional cast aluminum grill doubles as a heat-sink to minimize power compression and maximize driver performance.

The CVA-115 features a custom Cerwin-Vega designed driver that delivers thunderous bass. The powerful built-in 700 watt (1400 watt peak), high-efficiency Class H amplifier provides a highly-qualified amp solution. The CVA-Series of subwoofers (which includes the CVA-118 and the CVA-121) provides more user controls than another other active sub series in it‘s class, allowing users to fully customize their sound The controls include a sweepable low pass filter, a 4-position high pass filter and a Master/Slave mode providing easy set up of multiple units. The subwoofer also features a 35 mm pole-mount socket to accommodate a satellite speaker for full range performance.

CVA-115

• 700 Watts of power 1,400 watts peak

• Max SPL of 131 dB

• Freq Response 41 Hz - 135 Hz (-3dB)

• Sweepable Low Pass and 4-Position High Pass Filters

• Master/Slave Mode for Easy Setup of Multiple Units

• Compact Enclosure Design

• MSRP $ 1,049.00

Mike Newman, Cerwin-Vega‘s Director of Product Management, commented on the new CVA-115 active subwoofer, “The CVA-115 rounds out our active subwoofer series which also includes our 18-inch and 21-inch subwoofers. We decided to create a compact model to meet the needs of Cerwin-Vega customers who demanded a smaller form factor. Staying true to Cerwin-Vega‘s legacy, the CVA-115 is designed to deliver thunderous lows while still maintaining a crisp, clear mid range.”

Cerwin-Vega! will be showcasing the new CVA-115 during Winter NAMM at booth #6866. To make an appointment at NAMM with Cerwin-Vega‘s Marketing Manager Rick Richardson, please contact PR Representative Brian Metcalf at (305) 576-1171 x11 or brianmetcalf@maxborgesagency.com. To request one of the new CVA-115 Active Subwoofers for review or for additional product images and information, please contact PR Representative Brian Metcalf.

For more information on Cerwin-Vega! and to view the company‘s complete catalog, visit www.cerwin-vega.com.

About Cerwin-Vega!

A member of the Stanton Group of companies, Cerwin-Vega!, Inc. is a leader in the design, manufacture, and distribution of loudspeakers for the home and professional audio markets. Designed in the pursuit of dynamic, accurate sound reproduction since 1954, Cerwin-Vega! products are distributed throughout the world via a network of distributors and dealers in more than 75 countries. For additional information on all Cerwin-Vega products, please visit us online at www.cerwin-vega.com.

Media Contact:

Brian Metcalf

Senior Account Manager

Max Borges Agency

(305) 576-1171 x11

brianmetcalf@maxborgesagency.com

# # #

Hollywood, Fla. - (January 31, 2008) - Cerwin-Vega!, a leading manufacturer of loudspeakers and audio products, proudly announces the introduction of the CVA-28 active speaker system. Designed to be used stand alone or as a system solution with the CVA-115, CVA-118 and CVA-121 active subwoofers, the CVA-28 is a 3-way active speaker system that features dual 8” custom-designed Cerwin Vega drivers. These innovative drivers provide tight bass and defined mid-range while the concentric compression driver configuration provides smooth high frequency performance for remarkable detail and imaging. A 400 watt RMS 800 watt peak 3-way integrated amplifier powers this ultra-efficient design, resulting in low distortion and lots of volume. Similar to Cerwin Vega‘s CVA-115, CVA-118 and CVA-121 active subwoofers, the CVA-28 utilizes an attractive and functional front grill that dissipates heat from the drivers so they run efficiently with optimum output and performance.

The unique design methodology employed by Cerwin-Vega engineers in the creation of the CV Active series has produced a highly configurable system that is designed to offer maximum flexibility by offering a large number of configuration possibilities. The CVA-28 can either be mounted or installed thanks to integrated flypoints and pole mounts. The CVA mounting kits provide optimized arrayability configurations which include double and triple mounting options for Cerwin-Vega subwoofers. The unique “antler” mounting system allows up to 3 CVA-28 speakers to be horizontally arrayed on top of the subwoofers, with optimum dispersion angles cast into the supports, ensuring perfect set-up and sensational sound for the audience. Finally, shortened power and audio cables are utilized in an effort to create a clean and organized aesthetic for the Cerwin-Vega Active system.

“We used pro sound company experts to assist in the voicing of the CVA-28 and the entire CV Active line. Our team utilized multiple listening sessions that simulated real world environments from MP3 files and inexpensive mixers to high end consoles and jazz ensembles so our speakers would perform well in every possible application,” remarked Mike Newman, Cerwin Vega‘s Director of Product Management. “Our intent was to design the first truly modular and upgradeable sound system that delivers thunderous low end with incredible mids and highs. The versatility of the CV Active series will enable the user to grow their system as their needs expand. The size of the system allows the user to get more gear to the gig using less space for transportation. ”

CVA-28

• Dual 8” Active Full Range Speakers

• Frequency Response (±3 dB) 70Hz - 20 kHz

Frequency Range (-10 dB) 60 Hz - 20kHz

Max SPL 128 dB

Sensitivity (1w / 1m) 99dB

• Powerful Built-in 400 watt Amplifier, 800 watt Peak

• Durable Coolex Polyurethane Paint Finish

• Weight: 48 lb (21.8 kg)

• Dimensions (H x W x D): 20.5 in x (front) 11 in x (rear) 8.5 in x 12 in - 520 mm x (front) 279 mm x (rear)216 mm x 305 mm

• MSRP $849

Cerwin Vega! will be showcasing the new CVA-28 and the entire CV Active line during Winter NAMM. To make an appointment with Cerwin Vega‘s Marketing Director Rick Richardson, please contact PR Representative Brian Metcalf at (305) 576-1171 x11 or brianmetcalf@maxborgesagency.com. To request the new CVA-28 or the entire CV Active solution for review or for additional product images and information, please contact PR Representative Brian Metcalf.

For more information on Cerwin Vega! and to view the company‘s complete catalog, visit www.cerwin-vega.com.

About Cerwin Vega!

A member of the Stanton Group of companies, Cerwin-Vega!, Inc. is a leader in the design, manufacture, and distribution of loudspeakers for the home and professional audio markets. Designed in the pursuit of dynamic, accurate sound reproduction since 1954, Cerwin-Vega! products are distributed throughout the world via a network of distributors and dealers in more than 75 countries. For additional information on all Cerwin-Vega products, please visit us online at www.cerwin-vega.com.

Media Contacts:

Brian Metcalf

Senior Account Manager

Max Borges Agency

(305) 576-1171 x11

brianmetcalf@maxborgesagency.com

# # #

Hollywood, Fla. - (January 31, 2008) - Cerwin-Vega!, a leading manufacturer of loudspeakers and audio products, proudly announces the introduction of a new line of professional non-powered subwoofers at NAMM. The Cerwin-Vega Passive Series consists of two unique models, CVP-121 and CVP-118, featuring Cerwin-Vega‘s legendary driver design and bass performance. The CVP-121 and CVP-118 are capable of handling massive amounts of power, 4000 watts peak and 1400 watts peak respectively. Thanks to Cerwin-Vega‘s renowned Stroker™ technology, the CVP-121 delivers performance that is unparrelled by any other subwoofer on the market. Both subwoofers are housed cabinets typically reserved for smaller subwoofers: the CVP-121 houses a 21” driver in a typical 18” cabinet and the CVP-118 houses a 18” driver in a typical 15” cabinet. Cerwin-Vega‘s CVP line of subwoofers feature enormous amounts of power handling capabilities in a compact design, resulting in one of the best values on the market.

The CVP-121 features Cerwin-Vega‘s innovative Stroker™ technology, which utilizes a three spider driver design to optimize cone excursion and voice coil efficiency. Cerwin-Vega‘s CVP-121 is capable of handling massive amounts of power, 2000 watts continuous and 4000 watts peak, for overwhelming bass reproduction. To add to its unique design, the subwoofer is housed in a cabinet the size of a traditional 18-inch subwoofer, and includes a cast aluminum grille that functions as a heat sink for the subwoofer‘s driver. Cerwin-Vega has incorporated design elements in their new line of passive subwoofers that allow for flexibility in the configuration. The CVP-121 features three pole cups that allow for the addition of up to three top boxes.

The CVP-121 features are detailed below:

• 2000W Continuous, 4000W peak power handling for overwhelming bass

• Legendary Stroker® Technology for Extended Performance

• Solid 18-mm Hardwood Enclosure Construction

• Durable Coolex Polyurethane Paint Finish

• Max SPL 136 dB

• Cast Aluminum Grille functions as driver heat sink

• Frequency Response 32Hz - 135Hz

• MSRP: 1,299

The CVP-118 boasts a high-performance 18-inch Cerwin-Vega woofer for extreme power handling and exceptional low-frequency response. The CVP-118 features a singular pole cap that can accommodate up to two top boxes for maximum configurability. Like its 21-inch big brother, the CVP-118 is designed to deliver high quality sound while being packaged in an enclosure the size of a standard 15-inch subwoofer.

The CVP-118 features are detailed below:

• 700W Continuous, 1400W Peak power handling

• Solid 18-mm Hardwood Enclosure Construction

• Durable Coolex Polyurethane Paint

• Cast Aluminum Grille functions as driver heat sink

• Frequency Response 41Hz - 135Hz

• Max SPL 131 dB

• MSRP: $799

Mike Newman, Cerwin-Vega‘s Director of Product Management, commented on the company‘s new line of passive subwoofers, “Cerwin-Vega has built a 50 year legacy on mastering the art of bass and we‘ve continued that heritage today with the CVP subwoofer line. The design elements of the CVP-118 and 121 demonstrates our expertise in loudspeaker technology and further solidify Cerwin-Vega as the marquee name in the industry.”

Cerwin-Vega! will be showcasing the new CVP-118 and CVP-121 Active Subwoofers during NAMM at booth #6866. To make an appointment at NAMM with Cerwin-Vega‘s Marketing Manager Rick Richardson, please contact PR Representative Brian Metcalf at (305) 576-1171 x11 or brianmetcalf@maxborgesagency.com. To request one of the new CVP-118 or CVP-121 Active Subwoofers for review or for additional product images and information, please contact PR Representative Brian Metcalf.

For more information on Cerwin-Vega! and to view the company‘s complete catalog, visit www.cerwin-vega.com.

About Cerwin-Vega!

A member of the Stanton Group of companies, Cerwin-Vega!, Inc. is a leader in the design, manufacture, and distribution of loudspeakers for the home and professional audio markets. Designed in the pursuit of dynamic, accurate sound reproduction since 1954, Cerwin-Vega! products are distributed throughout the world via a network of distributors and dealers in more than 75 countries. For additional information on all Cerwin-Vega products, please visit us online at www.cerwin-vega.com.

Media Contacts:

Brian Metcalf

Senior Account Manager

Max Borges Agency

(305) 576-1171 x11

brianmetcalf@maxborgesagency.com

# # #

Hollywood, Fla. - (January 31, 2008) - KRK Systems, a leading manufacturer of studio monitors and recording control room solutions, is proud to announce the release of ERGO, a digital room analysis and correction system. ERGO (Enhanced Room Geometry Optimization) is compatible with all recording and monitoring systems and improves any studio mixing space by correcting for “real world” acoustic problems. At $799, ERGO delivers the most sophisticated room correction at a fraction of the cost of traditional room treatments.

The ERGO connects to a PC via Firewire when it is performing its room analysis, but since all correction processing resides in ERGO, no overhead is needed from the computer audio system. This means that ERGO can function in pure analog systems since it can work as a stand-alone room correction/speaker control unit after room analysis is complete. The ERGO hardware contains a thousand precision filters to control the audio environment, adapting and correcting virtually any mixing space, from home-based digital audio workstations to professional recording studios. In short, ERGO makes any monitor system more accurate by reducing “bad” room sound, resulting in mixes that translate well to any listening environment.

In developing ERGO, KRK teamed up with the acoustics experts at Lyngdorf Audio and integrated their patented “Room Perfect” 3D room analysis and correction algorithms to provide the best room correction solution available. The technology analyzes and compensates for undesirable room acoustics which can negatively impact audio mixdowns. “Lyngdorf is the world-leader in room correction technology,” says Tony Rodrigues, Vice-President of Technology and Business Development for KRK Systems. “ERGO melds this technology into a real-world form factor with controls that are relevant to any recording or audio processing environment.”

In addition to world-class room correction, ERGO also acts as a speaker switcher and master volume control and creates a seamless full range monitors-plus-sub system with subwoofer integration. ERGO is also a 4-in, 6-out Firewire audio interface that easily interfaces with PC and MAC hardware and audio software, ERGO provides high-quality audio through its use of 120dB SNR digital-to-analog converters and phase-accurate signal processing. KRK further incorporates Firewire and S/PDIF input for digital connections to DAWs such as Pro Tools and other systems. A high quality analog volume control and headphone output are also provided in the system.

“Getting audio to sound great in different environments is the true measure of a user‘s craft and monitoring system, “contends Tony Rodrigues “Adding ERGO to a mixing environment is one of the best ways to ensure mixes translate to different surroundings while getting the most out of recording monitors”. “

With an MSRP of $799, ERGO, due out in April, will be a cost-effective and valuable tool in any recording artist, enthusiast, or professional sound engineers‘ audio arsenal. For more information on ERGO, KRK Systems and KRK Systems complete product line, go to www.krksys.com or www.KRKERGO.com. To request additional information or images of the VXT Series, please contact PR Representative Brian Metcalf at (305) 576-1171 x11 brianmetcalf@maxborgesagency.com.

About KRK Systems

A member of the Stanton Group of companies, KRK Systems is a leader in studio monitors and control room solutions for the professional audio market. KRK products are distributed throughout the world via a network of distributors and dealers in more than 75 countries. For additional information on all KRK Systems products, please visit us online at www.krksys.com.

Media Contact:

Brian Metcalf

Max Borges Agency

(305) 576-1171 x 11

brianmetcalf@maxborgesagency.com

###

Malmo, Sweden (January 31, 2008) - For the past few months thousands of musicians from all over the world have been entering their songs into mi7.com’s contest to win a coveted recording session at one of the most prestigious studios in the world: the UK’s famous Real World Studios. Over that time these acts have been voted on by members of the MI7 Community themselves, with tens of thousands of votes being registered on the site. Now that the final Top Ten have been chosen by the users themselves, it’s time for the professional judges to decide the overall winner.

The international jury is made up of five editors of the top music business magazines around: Studio Magazine (Sweden), Musik-Kultur Magazine (Norway), EQ Magazine (US), and Gitarist Magazine and Slagwerkkrant (Netherlands). The jury is rounded out by two of the leading lights of MI7: Per Larsen and Rodney Orpheus, themselves both well-known figures in the music industry. Over the coming weeks this jury will be listening to songs from all the finalists and will be sending the overall winner to Real World Studios for the recording chance of a lifetime!

www.mi7.com is the most vibrant community for musicians worldwide. Headquartered in Malmo, Sweden, it has thousands of members from dozens of different countries, and provides a space for musicians to come together and share their music and experiences freely with each other on a daily basis.

About MI7

MI7 is a pan-European and Japanese partnership company staffed by professionals with many years of experience in all areas of the media industry. Representing a new concept in the distribution of media and music production products, MI7 brings competence, passion and results to both its customers and the industry. Plus, a bit of spice! Working in close cooperation with a selected range of manufacturers, MI7 has an extensive customer base that includes both media professionals and enthusiasts. In addition to offering distribution and customer service, MI7 also provides answers and solutions that make it easier for the customer to focus on what is really important, namely the creative flow.

More information at www.mi7.com.